Your keyboard may be unresponsive, but it is not the end of the world. Try a few different solutions to fix the problem. Try Resetting the SMC, deleting the.plist files, and using a USB extension cord. If none of these solutions works, you can try repairing the keyboard. If none of the methods work, follow the rest of this article for some suggestions.
Reset the SMC
Resetting the SMC may fix the problem, but it won’t solve all problems. If your keyboard is still unresponsive, try to backup your Mac before doing so, and make sure to disconnect any external devices before restarting your Mac. You may have installed new apps recently and this could be the cause of your keyboard problems. You must remove these apps before proceeding. If you’ve followed these steps, then your keyboard should be back to normal.
Resetting the SMC is different for older models without the Apple T2 Security Chip. In the MacBook Pro 2017, you can reset the SMC by performing a power cycle, which cuts off power to your Mac and forces it to reboot. It’s an effective way to fix most keyboard-related problems. It also fixes many other problems that have nothing to do with the hardware. Here are some of the steps to reset the SMC on your Mac:
First, shut down your Mac. After that, hold down the Option, Command, P, and R keys while restarting the Mac. You’ll notice an Apple logo, and then release the keys after the second start-up tone is heard. Resetting the SMC will reset the keyboard and trackpad back to factory defaults. Then, you can use the same procedure to fix unresponsive keyboard and trackpad problems.
If you’re having trouble using your MacBook, you should try reset the SMC first. It will solve a few common problems, including battery life, keyboard backlight, and sleep function. It will also make the computer fan run faster, and may even fix the sluggishness. However, it will not solve major hardware problems like a damaged power supply or faulty battery.
If none of the above methods work, try erasing your Mac’s data. If it’s hardware, try running the diagnostics on your Mac. Hold the D key while your Mac powers on to reveal any error codes. If the system doesn’t report any error codes, the problem is likely a software problem. If you can hear squeaky noises when turning the Mac over, you may have a hardware issue.
Delete the.plist files
One of the first things to look for is outdated MacOS. Often, a faulty keyboard can be caused by an outdated operating system, drivers, or firmware. To fix the issue, update your system. To update your Mac, open the system preferences and click on Software Update. Then, click the Update Now button. When the update is complete, check to see if your keyboard now works.
Next, open a Time Machine backup and restore your MacBook to an older version. Sometimes, the latest system upgrade can cause problems with the keyboard, so try restoring it to an earlier version. To do this, you need to hold down the command and shift keys at the same time. Once you’ve done this, reboot your Mac. You’ll notice the keyboard is back to normal.
Another possible cause of slow keyboard response is a bad connection. If the key press is taking longer than usual, then the problem may be a bad connection between the keys and the computer. If this is the case, it may be time to reset your keyboard’s settings. However, the procedure isn’t guaranteed to fix the problem. If the keys still don’t respond, you should try using a Bluetooth mouse.
Alternatively, deleting the.plist files can solve the problem. Several different applications may cause this problem. Make sure you check for pending system software updates before deleting these files. If these don’t solve the problem, you may need to restore your MacBook through Time Machine or recovery mode. If this method doesn’t work for you, try deleting the.plist files.
Another cause of unresponsive keys is a corrupted preferences file. If you are unable to select a particular application, the keys on your Mac might stop responding altogether. You can fix this by renaming the.plist files on your Mac. Restarting your Mac will also restore the settings that were used when it was new. If you try the method, make sure to backup your Mac with Time Machine first.
Using a USB extension cord
If you’re struggling with unresponsive keys on your Macbook Pro, you’re not alone. A USB extension cord can solve this problem and increase the reach of your included USB cable. Here’s how. First, change the USB ports. This should solve the problem completely, and you’ll be able to use the keyboard normally again. If this solution doesn’t work, try another one.
You can also clean the keyboard. This will require blowing on the keys with compressed air at a 75-degree angle. Alternatively, you can use a soft-bristled brush to clean the keys. One final problem could be the battery. If it’s too low, the battery may be affecting the keyboard. It may not even show a low battery notification.
Sometimes, the keyboard will be unresponsive because of its design. If you can’t find a replacement for it, try swapping the USB cable to another USB port on the same Mac. However, before you try this fix, make sure the USB extension cord is connected securely. If you still have problems, try plugging the keyboard into another USB port. If that doesn’t help, try resetting the system management controller.
If you’re using a wireless Apple keyboard, you should check to make sure it has enough battery charge. This is a quick fix that can resolve the problem. If you don’t have a spare battery, you should try a USB hub or extension cord. Once you’ve done this, you should be able to use your keyboard once again. If it’s still not working, try connecting it to another USB port and see if it’s still responsive.
Repairing the keyboard
If you’ve had problems with the keys on your MacBook Pro, the first step is to clean them thoroughly. Next, connect your spare keyboard. If all else fails, you can contact Apple for professional help. Some problems can be resolved at no cost, so contacting Apple is a good option. To begin, hold the MacBook at an angle of 75 degrees to the table or floor. Then, guide compressed air between the keys by blowing into the keyboard’s right side.
You’ll need to remove the keyboard cover to access the power switch. If the keyboard is removable, you can take it to an Apple repair service. The technicians are courteous and knowledgeable and can help you fix your MacBook. To ensure your safety, it’s a good idea to make a Time Machine backup before starting the repair. You’ll need to provide a receipt for the repairs and return them in as little time as possible.
If you’ve already tried several repair attempts and still haven’t succeeded, check the latest updates. Apple should make its repair limits explicit. The problem often comes from newly-installed apps. You can find the latest ones by sorting by “date added.” To prevent this problem from happening again, cleanMyMac X Uninstaller is a good app to use. It not only removes installed apps, it also helps keep your Mac healthy. If your keyboard is still not working properly, try disabling Slow Keys.
Then, you’ll need to clean the keyboard. You can do this by blowing on it with a soft-bristled attachment. Another thing to check is the battery. The keyboard can have trouble working if the battery has drained too much. To make sure that your battery is still fresh, you should check the battery. You should have a low battery alert in case of a low battery.
The problem has been a major problem on MacBook models since Apple introduced the new model in July 2018. The company did not specify whether these changes were related to the keyboard issue. However, iFixIt, a repair tool, examined a MacBook Pro from last year. It found that Apple cocooned its butterfly switches in a silicone barrier. This was likely a deliberate move to keep dust from adhering to the keyboard.